12 pottery glaze tips
12 Tips on Pottery Glazing that will help you masterfully glaze The glazing process has the ability to strengthen or break a pottery.
1- For complex shapes that include textured elements and working with wheels, in order to achieve the desired color, you can use a combination of working with a sponge, immersion and working with a brush. Immersion is the easiest way to make sure the glaze is evenly spaced between different parts, and then, with a little practice, it’s a glaze with a sponge. Brushing with a brush requires more practice, time and attention. The two most problematic factors are the use of glaze, water and gravity.
Water: When a pottery dish is biscuited (meaning that the pottery is baked in a kiln for various tasks such as design), it will not be well absorbed by the large amount of water, so it will not be the least amount. You may use water when glazing, which includes when you are making repairs.
Gravity: We suspect that no one has ever experienced the spontaneous dripping of glaze on a previous glaze.
2- After heating the biscuit pottery, keep your dishes clean. Lotions or even your hand sweat can cause resistant spots where the glaze sticks unevenly or doesn’t stick at all. Throughout all stages of the glazing process, including loading and unloading the furnace, work with a pair of disposable gloves and biscuit pottery. If you think your pottery is damaged, reheat it and risk breaking the glaze.
3. Eliminate all dust, including workshop dust, and even household and street dust. Use an air pressure device for the floor, however, work outside or in a well-ventilated area, as biscuit pottery dust is extremely irritating to the lungs.
4 – Before heating, use a silicone carbide sheet to remove all the hard spots that already exist. Place your work on a piece of sponge to prevent the sheet from slipping. Instead of washing, use a damp sponge. Squeeze the sponge and rotate it so that each side is used once. You can use half of those twelve sponges during each glazing session.
5- The glazes should be well combined. An electric mixer can be used to do this. If there is a dried glaze on the walls of the bucket, screen the glaze and return it to a new bucket.
6- First, glaze all the interior parts of the earthenware dish by pouring glaze, and then roll it in it for better coverage. For complex parts, steps (such as glazing the day before to dry the surface,
Especially with brush work, there is for glazing.
7- When you are removing unwanted glazes, cut it as much as you can with the necessary tools. The remaining glaze can be removed with a few movements of a damp sponge that also minimizes the amount of water.
8- Use a hard brush to help keep the glaze out of the tissue clean.
9- In order to immerse the glazes, choose a container with the right size for your work.
The small, wide bowls allow you to see what you’re doing, so use them even for smaller things that fit the envelope.
10. When you can’t dive or glaze with a sponge, it’s time to work with a brush.
As you work on the pottery with a brush, watch it, the glaze is shiny and moist when applied, and then becomes more opaque as the pottery absorbs water. If you create another layer too soon, you will re-create the base layer instead of the second layer. Consider gravity when working with a brush and the container to encourage glaze to go
Keep where you want to go and where you don’t want to go. If a drop leaks on the previously glazed surface, stop the snake, set the container aside, and wait. Prevent it from accelerating and clean the stain with a sponge. Allow the stains to dry and then brush with a dental tool or metal tape. Use a small flat brush to clean the glaze where you don’t have access to the sponge.
11- Do not take the glaze from the big bucket of glaze. Pour a small amount of glaze into a glass, then shake it occasionally to make sure it blends well.
Hold a large, damp sponge in your hand to keep the brush handle clean.
Glaze dripping often begins with a bunch full of glaze.
12. If you glaze dishes that do not have a defined base, expose them to 220-grain silicon carbide sanding. Sanding removes some of the glaze from the affected areas and shows where the remaining glaze should be cleaned. If you follow these tips in pottery, your results will improve.
